Legal notices & trademarks.
Attribution for the third-party marks named on this website, the basis on which we reference them, and the standards our work is measured against.
L.01 Trademarks
Marks named on this site.
Product and company names used across this website are the trademarks or registered trademarks of their respective owners. The marks below are acknowledged as follows.
- AUTODESKAdvance Steel, AutoCAD, Autodesk, DWG, DXF, Navisworks.Registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries.
- DWGDWG file format.DWG is the native file format for Autodesk’s AutoCAD software and is a trademark of Autodesk, Inc.
- TRIMBLETekla, Tekla Structures.Registered trademarks of Trimble Solutions Corporation (Trimble Finland).
- DASSAULTSOLIDWORKS.A commercial trademark or registered trademark of Dassault Systèmes SE or its subsidiaries in the United States and/or other countries.
- NEMETSCHEKSolibri.A trademark of Solibri Oy, part of the Nemetschek Group.
- OTHERSAll other marks.Any other trademark, service mark or trade name appearing on this website is the property of its respective owner.
L.02 Third-party product references
Why these names appear here.
Structural steel projects are delivered inside a defined CAD and BIM ecosystem. Naming that ecosystem is how a consultant, main contractor or fabricator establishes that project information can move between parties without loss.
- 01Identification only.References to third-party products exist solely to identify relevant project workflows, interoperability and technical environments.
- 02No implied association.Such references do not imply sponsorship, endorsement, partnership, certification or affiliation unless expressly stated in writing.
- 03No vendor logos displayed.This website uses no third-party product logos, badges or emblems. Vendor names appear as plain text only.
- 04Scope governs deliverables.The file formats and model deliverables issued on a given project are those set out in the agreed project scope and the project BIM Execution Plan.
L.03 Standards and codes
Whose standards we cite.
Codes, standards and schema referenced across this website remain the property of their issuing bodies. Citing a standard indicates the benchmark our work is measured against, not an endorsement by the issuing body.
- AISCAISC 303, AISC 360.American Institute of Steel Construction.
- ISOISO 9001, 14001, 45001, 19650, 5817, 7200, 128, 129-1 and 13920.International Organization for Standardization.
- BSI / CENBS EN 1090, BS EN 1993 (Eurocode 3), BS 5950.British Standards Institution and the European Committee for Standardization.
- AWSAWS A2.4, AWS A3.0, AWS D1.1.American Welding Society.
- OPENBIMIFC, BCF.Open standards published by buildingSMART International.
- COBIECOBie.An asset information exchange format defined through the United States National BIM Standard (NBIMS-US).
- DSTVDSTV / NC1.An industry-standard numerical-control file format for structural steel, defined by the German steel construction association (Deutscher Stahlbau-Verband / bauforumstahl).
- DMDubai Municipality (DM G+1).Contractor classification issued by Dubai Municipality, Government of Dubai.
L.04 Website content
What this site is and is not.
Content on finessesteelfab.com is published for general information about our capability. It is not a contractual offer, a technical specification, or engineering advice for a specific structure.
- IMAGERYIllustrative, not contractual.Photographs, renders and diagrams are indicative of the type of work undertaken. They do not represent a specific deliverable, finish or tolerance.
- SCOPECapability described in general terms.Services, standards coverage and deliverables vary by project. The governing document is always the signed scope of works.
- CONTENTCopyright.Text, layout, drawings and photography on this website are © Finesse Infra Steel Constructions Contracting LLC unless otherwise credited.
- LINKSExternal references.Links to standards bodies and third-party sites are provided for reference. We are not responsible for content hosted elsewhere.
L.05 Contact
Raising a legal notice.
If you are a rights holder and believe a mark, standard or item of content is attributed incorrectly on this website, write to info@finessesteelfab.com and mark it for the attention of the company contact. We will review and correct the page. For personal data and cookies, see the Privacy Policy.